need help alarm/remote start/keyless entry

hi

i have a 1993 ford mustang lx .i`m trying to install a alarm/remote start/keyless entry.i have the alarm done i need help with the rest.i dont have power door locks i got aftermarket locks,if anyone has installed a remote start or keyless entry ,please feel free to email me .dave

dmcollectibles@adelphia.net

We'll try to answer specific problems for you.  There are already basic overviews elsewhere on this site.

You'll have to post details of just what you're having trouble with.

i`m having problems with the remote start,wiring diagram shows ,violet wire to starter,orange wire to accessory (i need to know where to hook this)yellow wire to ignition #1 (i need to know where to hook this)brown wire to ignition #2 (i need to know where to hook this) (2) red wires to (+)12 volt constant.when i hook the (2) red wires to the battery all of the other wires are hot. 

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

Notes:

I haven't done remote start on a Mustang, but if you find different colors at the ignition switch, that's okay-----if they're big thick wires, and you can clearly tell they're coming from the switch, and you've tested them, you should be safe to hook up to them.

Going from what you said:

Yellows:  If your alarm has two (or more) constant power wires, use both yellows for these.  If the alarm only has one wire, use one yellow wire.  (Also, I'm pretty sure the two yellows are going to bridge together a little further down the harness anyway.)

BLACK/ red:  you said it works in the On and the Start positions?  This is Ignition---hook your remote starter's Ignition output here.

red:  works on the On position only?  Then that wire should power up the heater-----hook your remote starter's Accessory wire to it.

pink/red is starter?  Put your remote starter's Starter output here.  If your unit also is an alarm system with a starter kill relay, you'll have to cut the Mustang's starter wire in half............make sure the remote starter's Starter wire is attached AFTER the kill relay....... on the "engine" side of the wire....... this way the remote starter will still work when the alarm is on.

BLACK/ green works only in the ACC position?  Then it most likely only powers the radio and power windows.  In my opinion, the radio SHOULDN'T work with the remote starter-------you don't want the radio coming on loud at six in the morning and bothering your neighbors.  So I'd just leave this wire alone......but of course that's up to you.

If you would like to have the radio come on with the remote start:  Attach your remote starter's Second Ignition output to the Mustang's red wire....... and attach its Accessory output to the Mustang's BLACK/ green wire.