03 accord over cranking

2003 accord 2.4l vtec.  Got the blue wire on passenger side of console for tach.  Went to white plug on the left with the small letter E on the bottom right(white plug on the left of the pcm).  Installing an Ultrastart 1270.  Will learn tach, but will over crank for about half a second.  Any suggestions?  I've attempted to do low idle learn, tach learn with the car in gear, set the crank time to a max of 3 seconds, and tried using the "overcrank" adjustment.  I've attempted all of these several times over the last hour.  Is is possible/better to catch tach at the plug?  Seems like the car has a COP setup.

i've also run into this problem on other hondas. Sometimes it overcranks, sometimes it doesn't. Seems to happen with the Odyssey's. I get the tach at the same spot as you mentioned aswell. I do many of these cars, but I'm installing Astro. Again, its on a case by case basis. Shaun, we are the same height, that is neat!

12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.

hey green6767, empty your "inbox" in your PM section....I tried to send one to ya....it's FULL!

Oops. i didn't realize you could only have a storage of 20 maximum. Sorry bout that. I know how annoying it can be. They are all gone now. Shaun, we are the same height, that is neat!

12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.