valet switch doesnt work

Home / the12volt's Install Bay / Car Security and Convenience / valet switch doesnt work (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

grand master b

Member - Posts: 4

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 07, 2007

Location: United States

Posted: February 12, 2007 at 11:40 PM / IP Logged

hey i have 2000 honda s2000 which has a manual trans,which i hooked up a viper 5900 sst . Everything works fine expect valet switch o and i didnt use remote start, i read the installation guide and it says to hook up the heay gauge pink wire of the relay satellite to Ign output but when i do it makes a click noise nonstop. My question is do i have to use a relay o just a straight connection. Thanks for the help , sorry if type something wrong im new to the forums

Search for other posts by grand master b

Twelvoltz

Platinum - Posts: 2,384

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 13, 2007 at 8:21 AM / IP Logged

The yellow wire in the ribbon harness is the ignition input for that system. Make sure the yellow is seeing +12V when the ignition is energized. Actually if you are not using the starter kill output of the system, then I believe that is the only wire that needs to be connected for the security portion of that alarm to function properly.

Installer, IT support, and FFL. I need less hobbies.

grand master b

Member - Posts: 4

Joined: February 07, 2007

Location: United States

Posted: February 13, 2007 at 9:49 AM / IP Logged

hey Twelvolt the ribbon is harness with a pulg both ends which goes from the brain to the relay satellite, so your are say just to cut the yellow wire from ribbon harness and connectIgn output. O Thank's for your help.

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 13, 2007 at 10:25 AM / IP Logged

Yes, if you are not using the remote start or the starter kill portions of the system, the only wire required would be that yellow positive input.

Installer, IT support, and FFL. I need less hobbies.

grand master b

Member - Posts: 4

Joined: February 07, 2007

Location: United States

Posted: February 13, 2007 at 8:14 PM / IP Logged

yes i do have the starter kill portion and i hooked up the pink wire from the relay satellite to Ign output and the valet switch works fine. But when i start the car i hear a clicking nosie nonstop im i doing something wrong. thanks for helping me out.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: February 13, 2007 at 8:28 PM / IP Logged

You need to find out where the clicking is coming from.

I would have ditched the XCRS relay pack with the built-in starter kill and just used a single relay instead. Would have taken up less space, and would have been easier.

Cut the ribbon cable in half (or however long you need it)

Yellow from alarm brain ribbon cable ---> 86 on relay ----> ignition wire in car.

ORANGE / black in ribbon cable to 85 of relay

87a - cut starter wire

30 - other side of cut starter wire.

grand master b

Member - Posts: 4

Joined: February 07, 2007

Location: United States

Posted: February 14, 2007 at 8:56 PM / IP Logged

Jworm did what you said works great valet switch doesnt work -- posted image.

THANK YOU VERY MUCH

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet switch doesnt work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.