dei 530t problems

I had a alarm installed in my truck about 3-4 years ago and I had them install a DEI 530T for my front 2 windows. Everything worked just fine for about 2 years and then I started to have a problem. When I rolled up the windows they would stop every few inches, I would push the up button again and only a few more inches it would go. If I "help" the windows up they go all the way and it seems worse if the truck i not running. Both windows do it and it does not always stop in the same spots. When the window does stop going up I hear a click come from the DEI 530T. I already replaced one DEI 530T unit and the windows seemed to have a bit less trouble going up but it got worse over time. I check the resistance levels and I have all of the switches on the device flipped up, if I flip them dowm it's alot worse. Not sure if its the device, the wiring job or the window motors. Thanks

Sounds like bad teeth on the gear or rail.John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !