the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Stereo on key off


Post ReplyPost New Topic
< Prev Topic Next Topic >
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 16, 2003 at 2:29 PM / IP Logged  
hi new the form love everything about it allready, i do have a question about the radio on key off diagram, these are using 5 post relays i only have 4 post relays i don't have 87a could someone tell me what that does, and one more question what stops the radio from coming back on after i shut the door? thanks for any help u may offer
the12volt 
Administrator - Posts: 3,956
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: May 16, 2003 at 4:39 PM / IP Logged  

When the coil of an SPDT relay is at rest, or not energized,  terminals 87a (normally closed) and 30 (common) have continuity.

Initially, when you turn on the key to the accessory position, the first relay becomes a latch and continues to supply 12V+ to the radio's accessory lead even after you turn the key to the off position. Once a door is opened with the key in the off position, the coil of the second relay is energized and ground is broken to the coil of the first relay (latch). Now the first relay no longer supplies 12V+ to the radio. Once this happens, the only way for the first relay to supply 12V+ to the radio again is by turning the key to the accesssory position again.

Stereo on key off -- posted image.

Stereo on key off -- posted image. the12volt • Support the12volt.com
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 16, 2003 at 4:48 PM / IP Logged  
do i have to use this diagram, i want it to power everything, u are showing the 3 relay one i was wondering if i could just use the 2 relay?
the12volt 
Administrator - Posts: 3,956
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: May 16, 2003 at 5:03 PM / IP Logged  

The third relay in my diagram is needed to prevent the radio, or whatever you have the set up powering, from turning off when you open a door with the key in the accessory and run positions. 

Stereo on key off -- posted image. the12volt • Support the12volt.com
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 16, 2003 at 6:48 PM / IP Logged  
i understand that if i was using diodes to only turn on a specific thing, but i need it to power everything, once i turn the key to on or  acc, the whole relay setup would get bypassed and the radio would get power regardless because u aren't cutting the wire, ur just splicing into it and adding an additional power source? correct me if im wrong, and my other question where are u getting 5 post relays, i have looked a couple places like radio shack they only have 4 post ones
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 16, 2003 at 6:53 PM / IP Logged  
actually i have to ask another question, if u want to cut power to everything but the radio couldn't u just put a diode before ur splice inline to the radio? that way power can't run backwards? through the accessory line? wouldn't that be all u need to do or am im completly missing something
the12volt 
Administrator - Posts: 3,956
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: May 16, 2003 at 8:11 PM / IP Logged  

LittleBill wrote:
....once i turn the key to on or  acc, the whole relay setup would get bypassed and the radio would get power regardless because u aren't cutting the wire, ur just splicing into it and adding an additional power source? correct me if im wrong, and my other question where are u getting 5 post relays, i have looked a couple places like radio shack they only have 4 post ones

Look at the diagram again, you are cutting the wire to the radio That's what the dashed line indicates. You can purchase SPDT (5 posts) relays from a local electronics shop or on line. You can also call Eagle Parts at 800-726-5930 Monday through Friday 8:00 AM - 5:00 PM CST.

Stereo on key off -- posted image. the12volt • Support the12volt.com
the12volt 
Administrator - Posts: 3,956
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: May 16, 2003 at 8:19 PM / IP Logged  

LittleBill wrote:
actually i have to ask another question, if u want to cut power to everything but the radio couldn't u just put a diode before ur splice inline to the radio? that way power can't run backwards? through the accessory line? wouldn't that be all u need to do or am im completly missing something

Yes and no. You would have to use a diode with a rating high enough to safely pass the current draw of the radio without destroying the diode. If that is what you want to do, I'd still use relays and one amp diodes to power the radio while isolating it from anything else you want to run on the same lead, but my answer is limited and depends on what you mean by everything.  If you describe exactly what it is you are trying to do,  I'll do my best to describe what you'll need to do to accomplish it.

Stereo on key off -- posted image. the12volt • Support the12volt.com
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 16, 2003 at 9:22 PM / IP Logged  
ok lets see if i get my information correct then, for the diode, everything u pass through must be takin into account so if im pulling 10 amp through the line, i have to make sure the diode can handle 10 amps, it doesn't matter what its blocking just whats actually get passed through (ex. my radio)? did i understand that correctly, and for the part about cutting the wire, im not using that diagram im using the 2 relay setup which doesn't cut the accessory line, and what i mean by powering everything, i mean like my sunroof, im just going to splice into my radio constant and ground wires, i don't see enough power being drawn to blow the 10 amp fuse but i may be wrong, im going to go to curcit city tommorow, those guys probably have relays from the remote starters there
LittleBill 
Copper - Posts: 72
Copper spacespace
Joined: May 16, 2003
Location: United States
Posted: May 17, 2003 at 2:30 PM / IP Logged  

well i got my relay circuit does sell them but they are 12.99 13.77 with tax, this is high although it does come with the socket and 14 gauge wiring part number is 525t but if u just need the realy which is really all i needed its 610t, i will post my results later

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer