bypass parking brake

Home / the12volt's Install Bay / Relays / bypass parking brake (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ellite1123

Member - Posts: 4

Joined: August 20, 2003

Posted: August 20, 2003 at 4:22 PM / IP Logged

hey guys , how would i wire up a relay to bypass parking brake for a lexus RX330 so i can watch dvd on nav screen up front!!! Please help :(

dayzout

Member - Posts: 22

Joined: August 20, 2003

Location: United States

Posted: August 20, 2003 at 6:42 PM / IP Logged

What Kinda unit are you using?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 21, 2003 at 2:45 PM / IP Logged

If all you need to bypass is the parking brake then just push it one click. If you haven't checked yet you might want to see if this even works, alot of the new navs will cut out when the vehicle is in motion.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

ellite1123

Member - Posts: 4

Joined: August 20, 2003

Posted: August 21, 2003 at 7:05 PM / IP Logged

yes i know you can press to 1 click ,but light on dash is annoying, and as for the vss wire put it on a toggle switch , nav will not work when switch is flipped of course but maybe video will come up, just need know if there is a way to bypass the brake without light coming on in the dash?? thx alot guys for the hlp :)

dayzout

Member - Posts: 22

Joined: August 20, 2003

Location: United States

Posted: August 21, 2003 at 8:30 PM / IP Logged

It will but using it that way with a factory navigation will mess up your on map location/coordinates and will have to constantly be reset. There is other ways to do it but if you ane not 100 % familiar on how to build raw circuit boards I cannot explain for the safty of your electrical system and computer. sorry but safty first.

Port

Member - Posts: 6

Joined: August 18, 2003

Location: United States

Posted: August 23, 2003 at 9:30 PM / IP Logged

NEED TO KNOW WHAT SCREEN YOU ARE USING

Some screens have to see a ground to enable the screen and thats it

some have to see the +12volt side of the foot break and pulsed atleast twice to ground then left connected to ground and the 12 volts off (foot off the break pedal after you pulsed it) THESE WIRES ARE SEPERATE OF COURSE

So what unit are you tring to turn on

Port

Member - Posts: 6

Joined: August 18, 2003

Location: United States

Posted: August 23, 2003 at 9:33 PM / IP Logged

^^^^^^^^^^^^^^^ guess i should pay alittle more attention before i post .......sorry

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypass parking brake

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.