the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5 wire locks and alarm?


Post ReplyPost New Topic
< Prev Topic Next Topic >
blandq 
Member - Posts: 1
Member spacespace
Joined: May 14, 2004
Posted: June 07, 2004 at 3:31 PM / IP Logged  

I have a new set of MES door solenoids for an early mustang (switch-less).  They seem to work very well.  Now I find the dual relay rest at ground, ground initiated interface between alarm and poopers through 12volt.

  - Thank you!  It makes perfectly good sense!

  WHAT I AM HAVING TROUBLE WITH:

  As an Electrical Engineer AND not knowing what the insides of the relay (MES lock control) module actually looks like, it seems that in effect we are shorting 12V to ground when the alarm fires and the realy interface applies 12 volts to one leg of the MES actuators.  During testing I found that after 8-12 acuations within a 60 second period that the wires were warm...too warm.

  As I mentioned above a review of what we are actually doing seems to make sense...yep, apply 12V to ground and the wire does get hot....

  Comments please...Not on this side of the EE world, as opposed to Unix MP servers, I want to make sure I'm not missing something. 

auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: June 07, 2004 at 5:02 PM / IP Logged  
Think of the popper as a reversed speaker, or reversed speaker engine at least, that moves in one direction. What happens is that you apply +12V through one side of a coil, creating magnetism, and pulling another magnet. It draws alot of current to accomplish this, speakers/coils aren't very efficient. Most of the energy gets turned into heat causing the wiring to heat up. This is completely normal, and it is unlikely that you will be using the popper enough times in a short period of time to cause any harm to it or the vehicle. Flame away.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, August 25, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer