2005 4runner alarm to hazard

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2005 4runner alarm to hazard (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lecrouart

Member - Posts: 1

Joined: July 06, 2008

Location: Quebec, Canada

Posted: July 10, 2008 at 8:25 PM / IP Logged

Hi guys,

I have a Viper 5900 sst hooked up to a 2005 4runner.

The alarm is hooked up to parking lights. They are WEAK. How do I change and get the hazards instead. I'm not too familiar beyon basic wiring.

Thanks

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: July 11, 2008 at 1:38 PM / IP Logged

You can use the white wire at the hazard switch instead. Just make sure that the 5900 is set for negative polarity instead of positive.

To change the 5900 over to a negative output, place the outboard jumper in the (–) position.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 4runner alarm to hazard

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.