2003 mazda 6

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 mazda 6 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ktown6

Member - Posts: 1

Joined: September 11, 2008

Location: Utah, United States

Posted: September 11, 2008 at 1:15 AM / IP Logged

Can anyone help me with a aftermarket car alarm and remote start wiring diagram for a 2003 mazda 6?

kola7126

Copper - Posts: 93

Joined: September 13, 2007

Location: Russian Federation

Posted: September 12, 2008 at 11:28 AM / IP Logged

MAZDA

MODEL	YEAR(S)
MAZDA 6	2003 -2004

KEY	T-HARNESS	IMMOBILIZER
N/A	N/A	MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM, Requires 791 Bypass Module and extra Ignition Key

PART	COLOR	LOCATION
12 VOLT CONSTANT	BLACK (+) and BLACK / YELLOW (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/ BLUE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	BLUE (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	BLACK/ RED (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	BLACK/ WHITE (+)	IGNITION SWITCH HARNESS
KEYSENSE	WHITE/ BLUE (+)	IGNITION SWITCH HARNESS
PARKING LIGHTS ( - )	RED / WHITE (-)	@ HEADLIGHT SWITCH
PARKING LIGHTS ( + )	LIGHT GREEN/ BLACK (+)	IN DRIVERS KICK PANEL, 14-Pin Plug
POWER LOCK	LIGHT GREEN (1-Wire Door Lock System) See NOTE *1	IN DRIVERS KICK PANEL
POWER UNLOCK	Same wire, See DIAGRAM	See DIAGRAMS
DOOR TRIGGER	GREEN/ ORANGE (-)	IN DRIVERS KICK PANEL
DOMELIGHT SUPERVISION	YELLOW/BLACK (-), Requires Part #775 Relay	IN DRIVERS KICK PANEL
TRUNK RELEASE	YELLOW (-), Requires Part #775 Relay	@ TRUNK RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	PURPLE / WHITE (-)	@ STEERING COLUMN HARNESS
TACH	ANY wire NOT BLACK/ WHITE or any wire with a GREEN/ STRIPE	@ IGNITION COIL
WAIT TO START LIGHT	N/A
BRAKE	GREEN (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	Disarms with KEYSENSE Wire	@ IGNITION SWITCH HARNESS
ANTI-THEFT	TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY	TRANSPONDER @ IGNITION SWITCH TUMBLER

EXTRA INFORMATION

NOTE *1 to LOCK requires a (-)Negative thru a 1400 Ohm Resistor, to UNLOCK requires a Straight (-)Negative. Some units will also require 2 extra Relays Part #775, to connect, See DIAGRAMS

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 mazda 6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.