the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

94 cadillac seville sls bose gold series


Post ReplyPost New Topic
< Prev Topic Next Topic >
axccess 
Member - Posts: 2
Member spacespace
Joined: June 06, 2011
Location: California, United States
Posted: June 06, 2011 at 11:49 AM / IP Logged  
First off & foremost the site rock!
I have a 94 seville sls with the bose gold series. I am in really bad need of the wire schematics for it including the power antenna. Any help with this would be extremely appreciated! As im a complete noob with cars in gen.. i can do the very basics..
What im wanting to do is rip all that bose crap out and not mess something up!
And if i could be directed to somewhere i could find the wire harness for that system would be great, ive been searchin every place & have come up short.. it consists of two plugs..
Thanks to all in advance
Death2Flesh Inc.
i am an idiot 
Platinum - Posts: 13,709
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 07, 2011 at 8:39 PM / IP Logged  

http://www.metraonline.com/part/70-1857

The 2 plugs in the dash of your vehicle are of no importance when installing an aftermarket deck.  The unit in your dash is simply a control unit that controls the tuner/amplifier which is in the trunk of the car.  Notice that there is not an antenna jack on the back of that unit.

axccess 
Member - Posts: 2
Member spacespace
Joined: June 06, 2011
Location: California, United States
Posted: June 08, 2011 at 10:40 AM / IP Logged  
Thanks for the link to the harness.. ive been lookin for the antenna extension also.. cool that its all there in one set. yea, i was aware of the hu being only a controler for the tuner in The trunk (behind the antenna) i know the harness has no "real" importance with installin.. i already have the aftermarket deck installed with new speakers/wires.. i just couldnt figure out wich wire(s) where for the power antenna and it would make it alot easier to use the harness compared to testin every single wire or rewire it completely i already had to run a constant 12v cause i couldnt find one with a test light.. only the ignition.. and to top it off the colors they used are not the usual.. especially for someone that only knows enough to get by & still learnin.. thanks again for pointing me in the right direction!
Death2Flesh Inc.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 15, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer