the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring diagram for 91 nissan Maxima w/ Bose stereo


Post ReplyPost New Topic
< Prev Topic Next Topic >
rich 
Member - Posts: 1
Member spacespace
Joined: April 06, 2002
Location: United States
Posted: April 06, 2002 at 4:02 PM / IP Logged  

All of the diagrams on this site were coming up short.  I need to know what the following are:

WHITE/ brown, YELLOW /GREEN, yellow/red (illumination?), GREEN/ YELLOW, WHITE/ green, BROWN / black and 2 additional black wires.

thanks for any help.

Rich

the12volt 
Administrator - Posts: 3,956
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: April 06, 2002 at 4:46 PM / IP Logged  

Hi rich, of all the wire colors you mentioned, I could only find info on these:

WHITE/ Green RF+

WHITE/ Brown RF(-)
(RED / Yellow Illumination)

If you can't find a listing for the colors you have, here are a couple of things you can do to determine what each of them are.

If you still have the factory unit and it's some kind of working order and is able to connect to the factory harness, use your meter to find accessory, constant 12V+, power antenna, amp remote, and ground, Then unplug the harness, apply 12V+ to the remote lead and with an analog meter or small battery (9V or smaller) measure each of the remaining leads in pairs to find your speaker leads.

If you can't connect the factory stereo to the harness in the vehicle to do as above, first measure for 12V+ with the key in the off and on positions to determine constant and switched 12V. Next measure each of the remaining leads with the parking lamps on to find the illumination lead. Next look at the rear speakers and compare all leads to the ones remaining up front. Look for wires that are the same color on each of them and measure each with your meter. After you've determined which of these is the remote lead, power it up and with an analog meter or small battery (9V or smaller) measure each of the remaining leads in pairs to find each set of speaker leads. Next measure each of the remaining leads for resistance to ground. With a 2 amp fuse, connect 12V+ to the lead showing the highest resistance to ground if any difference is noticeable or the ground wire (lowest resistance)  is not obvious to find your power antenna lead. If the fuse blows on the first try, you found ground. If the antenna goes up, you found the power antenna lead.

If you don't want to attempt any of the above, another resource to try is the library.  

Let us know how you make out.

the12volt


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 9, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer