1993 318is Diagram for remote start

I need the diagram for a 1993 bmw 318is. thanks

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|RED / wht or red      |+  |ignition harness            ||          STARTER|blk/yel or black    |+  |ignition harness            ||         IGNITION|green               |+  |ignition harness            ||  SECOND IGNITION|pur/wht or purple   |+  |ignition harness            ||       POWER LOCK|WHITE/ red           |+  |factory alarm plug *1       ||     POWER UNLOCK|blue/red            |+  |factory alarm plug *1       || PARKING LIGHTS +|gry/pur, gry/yel *3 |   |headlight switch            || PARKING LIGHTS -|blue/green (hazards)|   |factory alarm plug *1       ||       HEADLIGHTS|yellow              |   |headlight switch            ||     DOOR TRIGGER|*4                  |-  |factory alarm plug *1       || DOME SUPERVISION|comes on with unlock|   |                            ||  TRUNK/HATCH PIN|BROWN / white         |-  |factory alarm plug *1       ||         HOOD PIN|PURPLE / green        |-  |*6                          ||  FCTRY ALARM ARM|*7                  |   |                            ||FCTRY ALRM DISARM|*7                  |   |                            ||       TACHOMETER|black               |   |instrument cluster *2       ||       BRAKE WIRE|blu/red or grn/red  |+  |at brake pedal switch       ||     HORN TRIGGER|brn/red or brn/yel  |-  |steering column             ||           WIPERS|blk/gry and blk/blu |-  |steering column             ||  LF WINDOW UP/DN|black - purple      |A  |window switch *5            ||  RF WINDOW UP/DN|blk/blu - pur/blu   |A  |window switch *5            ||  LR WINDOW UP/DN|blk/yel - pur/yel   |A  |window switch *5            ||  RR WINDOW UP/DN|blk/wht - pur/wht   |A  |window switch *5            |

Notes:

*1 The alarm plug is a black 12 pin plug located just behind the glove box. It is mounted with the pins facing you atop a vent just to the left of the body computer. Other wires at the alarm plug are: 12V- RED / white; Accessory- PURPLE / white; Siren- BLACK/ blue; Ground- BROWN / orange. Do not use the power sources at the alarm plug to operate high-current devices. The other side of the siren wire is mounted in a 2 pin plug at the passenger rear corner of the engine compartment. The other wire in the plug is a brown ground wire. DEI recommends attaching the siren at this point.  *2 The wire is located in a white connector behind the instrument cluster. Do not unplug the white connector with the ignition on or turn the ignition on with the plug disconnected.     *3 These wires are the separate left and right parking light wires. Use both wires and isolate each.  *4 Door triggers are BROWN / gray for the drivers front door, BROWN / blue for the passenger front door, and BROWN / black for the rear doors (if equipped). Use all three wires and diode isolate each.   *5 These wire listing are for the 325iC. DEI does not recommend interfacing with windows on all other 3 series.  *6 The hood pin wire can be found at the radio harness or at the hood pin switch.    *7 If equipped with a factory alarm, the alarm will be plugged into the factory alarm plug. The only way to arm and disarm the factory alarm is with the factory remote. If your planning on using the 8360 pre-wired alarm harness the factory alarm must absent or removed.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA