Using the option port - Clarion TTX7101

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Using the option port - Clarion TTX7101 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tjhannink

Member - Posts: 3

Joined: June 11, 2003

Location: United States

Posted: June 13, 2003 at 7:07 AM / IP Logged

I have Clarion TTX 7101 TV tuner as part of my system and am trying to use the Rear Vision option port to connect a rear-view camera. I have a Clarion CCA-389 cable which has the correct connector for the port and have hooked it up to a video source, but my head-end unit (DRX-7475) will not display the video for that source. Does anyone have any ideas on how I can get it to work?

Thanks,

TJ Hannink

Goldibox - 1987 Vanagon Camper, Wolfsburg Edition

Winter Park, Florida

http://home.earthlink.net/~tjhannink/

http://groups.yahoo.com/group/wolfsburg_campers

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 13, 2003 at 7:38 AM / IP Logged

i cant find any in on this product to even check out the manuals and try to help.. is this a indash screen or something.

if it is an indash screen than it will have a wire that needs to be grounded in order to get picture.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

tjhannink

Member - Posts: 3

Joined: June 11, 2003

Location: United States

Posted: June 13, 2003 at 8:11 AM / IP Logged

The TTX7101 is a stand-alone Clarion C-Bus TV tuner that is controlled by my headend unit, a Clarion DRX7475. In addition to being a VHF/UHF tuner it has two sets of AV inputs, which I am currently using. Clarion makes a power supply module (CAA-188) that interfaces between the rear view camera and the tuner input but I haven't been able to locate one to purchase. I was hoping to fool the option port into thinking that it was hooked to the power supply module and allowing the option port video info to be displayed.

I have a line diagram and basic component info of my system here: <http://home.earthlink.net/~tjhannink/AV_System_Diagram_and_Product_Specs.htm>

A copy (pdf) of the owners manual is on the Clarion website < http://www.clarion.com/home.htm>, select [MANUALS] from the top menu bar, then [Manuals - Multimedia] on the FAQ's and Manuals page, select [NEXT], its on the 3rd page in.

Thanks,

TJ Hannink

Goldibox - 1987 Vanagon Camper, Wolfsburg Edition

Winter Park, Florida

http://home.earthlink.net/~tjhannink/

http://groups.yahoo.com/group/wolfsburg_campers

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Using the option port - Clarion TTX7101

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.