Alpine IVA-300 bypass

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Alpine IVA-300 bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ramsfan

Member - Posts: 24

Joined: June 28, 2003

Posted: August 21, 2004 at 9:10 PM / IP Logged

Just purchased the alpine unit.Everything works except the video.I have searched and read about the pac-7 module.I will order it but in the meantime i wanna hook it up with a toggle switch or just directly to the foot and parking brakes.I just wanna get video for now.The car doesn't have to be moving.I have a 2003 F150 where is the reverse wire located as i know you can hook it up this way.Also on the foot brake i have 2 wires coning out.1 is blackThe other is GREEN/ red.Which wire do i use.

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: September 02, 2004 at 2:18 PM / IP Logged

the bypass will not work with a toggle switch on the foot brake. The unit must see the polarity change. The brake wire is lt green (+). You won't need the reverse wire.

Do it right the first time

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine IVA-300 bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.