2004 Trailblazer wiring for DVD player.

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 2004 Trailblazer wiring for DVD player. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sneakerdz

Member - Posts: 2

Joined: September 05, 2004

Posted: September 05, 2004 at 3:47 PM / IP Logged

Guess that last post didnt work. Just bought a 2004 Trailblazer LS EXT and wanting to hook up a DVD player and two screens. I cannot find any power wires that power on and off with the ignition. Where can i find a wire that i can tap into or if there is one specifically one for it.? Thanks in advance for any help someone can give me, Dennis

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 05, 2004 at 4:05 PM / IP Logged

Have you tried the ignition harness?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

sneakerdz

Member - Posts: 2

Joined: September 05, 2004

Posted: September 05, 2004 at 4:24 PM / IP Logged

Wasn's sure if I wanted to do that yet. Didn't want to mess anything up. I read a few on here but they were all about radio hookups. So you think I should use the ign wiring? Is this the only place you know of? Like what about when you get the DVD system from the factory? I am sure that is not wired into the ign harness. Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 05, 2004 at 10:57 PM / IP Logged

Use the PINK wire in the IGNITION HARNESS for any of your switched ignition hookups. Other than this location you could meter a fuse connection, but you run the risk of blowing a fuse if the amperage draw is higher than the rated fuse. Using the ignition harness will ensure that this doesn't happen.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 Trailblazer wiring for DVD player.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.