avic d2 hard reset/reformatting

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / avic d2 hard reset/reformatting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

deejayeb

Member - Posts: 1

Joined: August 07, 2007

Posted: August 07, 2007 at 1:19 AM / IP Logged

Hey All

I recently was dumb enough to puchase an upgrade disc off Ebay which screwed up my AVIC D2 and now it wont work and says my disc is no good. Tried putting the original OEM Disc in and I get the same error now.

I figured out how to get into the setting screen by Holding down eject and the reset button, then up,right up right down right down right enter... However once Im in there I dont know what to do. I just want to reset the unit back to the way it was when it came from the manufacturer..

If ANYONE could please help me out with this it would be greatly appreciated.. Im about to just take it out and toss it the trash..

Thanks so Much

dave

i am an idiot

Platinum - Posts: 13,675

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 07, 2007 at 9:41 AM / IP Logged

Have you tried avic411.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avic d2 hard reset/reformatting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.