02 dodge dakota r/t speed and reverse

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 02 dodge dakota r/t speed and reverse (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

roneto5

Member - Posts: 1

Joined: February 16, 2006

Location: United States

Posted: September 24, 2007 at 11:27 PM / IP Logged

I am trying to locate the speed and reverse wire to install a pioneer avic n3. Please i need location and colors of wires thx

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: September 29, 2007 at 11:38 AM / IP Logged

The speed sense wire is at the PCM of the car. Its pin 27 of connector 2. If its the same as my 04 wrangler as in PCM then it has 3 big plugs at the passenger fender. It would be the middle plug and its either a WHITE/ orange or blue. In my case it was WHITE/ orange. As for the reverse signal I would recommend going to the actual right for the trigger. Good Luck and sorry for the late post but hey at least you got an answer.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 dodge dakota r/t speed and reverse

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.