2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start

Home / the12volt's Install Bay / General Discussion / 2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start

Welcome Guest :)

Members

< Prev Topic Next Topic >

cooter347

Member - Posts: 2

Joined: November 08, 2025

Location: Wisconsin, United States

Posted: November 21, 2025 at 8:38 AM / IP Logged

Hello, Im trying to install a Viper 4115V remote starter with an iDatalink ADS-ALCA into a 2006 Dodge Ram 3500 5.7 Hemi. I wired everything up according to the wiring diagram for the ADS-ALCA. When i remote start it, the ignition comes on and all i get is a buzzing sound coming from the TIPM, which im assuming is the starter relay. Also, whats weird is if i install the diode in the ignition wire like they want, i dont get any ignition power. If i leave the diode out, i get ignition power.

cooter347

Member - Posts: 2

Joined: November 08, 2025

Location: Wisconsin, United States

Posted: November 21, 2025 at 8:50 AM / IP Logged

2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start -- posted image.

This is the wiring diagram i used. I am using 2 way data mode.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.