the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

8 volt horns on car’s 12 volt system


Post ReplyPost New Topic
< Prev Topic Next Topic >
askal 
Member - Posts: 3
Member spacespace
Joined: June 18, 2008
Location: Philippines
Posted: June 18, 2008 at 10:00 AM / IP Logged  

Hi, I hope someone could help me out.. I have a pair of Mitsuba Turbine type horns which came from Japan.  Im not really sure if I can hook the pair to my car since the specs "per" horn is 8volts 9amps 72watts.. can i safely use the horns in my car even though my ride's electrical system runs on 12v-14.4v?  Is there anything I could do to use it? Do I need a voltage regulator or something? Need help fast.. thank you for looking into my concern..

askal

Manila, Philippines

Big Dog 
Gold - Posts: 1,265
Gold spaceThis member consistently provides reliable informationspace
Joined: May 02, 2002
Location: Quebec, Canada
Posted: June 18, 2008 at 10:25 AM / IP Logged  

I'm not familiar with your horn but if it's an electric motor driven turbine, you could try connecting the two in series.

Prepare your future. It wasn't the lack of stones that killed the stone age.
techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: June 18, 2008 at 4:49 PM / IP Logged  
You can calculate a resistor to add in line to reduce voltage. I would think 10 ohms or so based on 13vdc and the horn needs 8vdc.
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 18, 2008 at 10:58 PM / IP Logged  
I really think you need to wire them in series and see if they perform well enough for you. Are there 2 wires on each unit, or is there one wire and they depend on chassis for ground? A resistor will not reliably drop the voltage. The motor pulls more current at startup than they do when up to speed. When they need the voltage to startup, there will be more drop across the resistor
askal 
Member - Posts: 3
Member spacespace
Joined: June 18, 2008
Location: Philippines
Posted: June 18, 2008 at 11:05 PM / IP Logged  

So meaning to say, I must add a  10 ohms resistor in line per horn?  I tried installing it yesterday by putting a 30amp inline fuse and double throw relay per horn.. and it works but I need to make sure and be safer.  Would you consider the one I did PLUS the resistors or just add in a resistor per line?

BTW, what kind of resistor should I purchase? Brand, etc..

Thanks man, youre the coolest! :) 

askal 
Member - Posts: 3
Member spacespace
Joined: June 18, 2008
Location: Philippines
Posted: June 18, 2008 at 11:08 PM / IP Logged  

i am an idiot wrote:
I really think you need to wire them in series and see if they perform well enough for you. Are there 2 wires on each unit, or is there one wire and they depend on chassis for ground? A resistor will not reliably drop the voltage. The motor pulls more current at startup than they do when up to speed. When they need the voltage to startup, there will be more drop across the resistor

There is only one wire per unit and it depend on the chassis for ground.  Now my question is how do I reduce the voltage from 12v to 8vdc for the horn. 

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 24, 2008 at 12:33 AM / IP Logged  
Oh just hook em up..... they'll be REALLY loud!
Mad Scientists 
Silver - Posts: 380
Silver spacespace
Joined: February 07, 2004
Location: United States
Posted: June 24, 2008 at 12:19 PM / IP Logged  

It looks like it would be a 0.5 ohm 50w resistor.. that's kinda big.

Jim 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer