Solobaric box

Home / the12volt's Install Bay / General Discussion / Solobaric box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

underground

Copper - Posts: 127

Joined: June 16, 2002

Location: United States

Posted: June 24, 2002 at 5:01 PM / IP Logged

I need help making a box that is vented for 2 Solobaric 15" L7 speakers. Does anyone have a clue on how to get these demensions that I need? I have them in a sealed box but want to try them in a ported box. Please help!

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: June 24, 2002 at 6:37 PM / IP Logged

Recommended Vented Box Volume: The vented enclosures incorporate massive slot-loaded ports with ultra-low air velocity and hard-hitting bass. These are not your traditional port tubes; the slot-loaded ports are integrated into the enclosure design.

Compact: 3.0 cu/ft; 2.5"x16.25" port opening; 19.5" port depth; each coil can handle up to 500 watts RMS (1000 watts peak)
Street Bass: 4.5 cu/ft; 3.0"x16.25" port opening; 14.75" port depth; each coil can handle up to 500 watts RMS (1000 watts peak)
SPL/Deep Bass: 6.0 cu/ft; 3.5"x16.25" port opening; 13.75" port depth; each coil can handle up to 500 watts RMS (1000 watts peak)

Note: The power handling specifications listed with the vented enclosure recommendations apply only when a 25Hz, 24dB/octave subsonic filter (sold separately) is used with this woofer; if a subsonic filter is not used, the power rating will decrease and excessive port noise can occur.

Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 13.905" x 13.905" square opening.

GlassWolf

Copper - Posts: 365

Joined: June 22, 2002

Location: South Carolina, United States

Posted: June 24, 2002 at 11:40 PM / IP Logged

I would note though, that last I recall, solobarics are designed for sealed, small-volume enclosures. I have an entire book here somewhere from Stillwater on enclosure design and stats for tehir older drivers. Their Solobaric and C-series are for sealed boxes, where the F-series is/was for ported enclosures.

-GlassWolf

Pioneer Stage-4, Orion, DynAudio, Fi

pervitizm

Copper - Posts: 125

Joined: April 16, 2002

Location: United States

Posted: June 25, 2002 at 9:32 PM / IP Logged

Check out my post and see if the information on there can help you out. But you can also go to kicker too and look at the designs that they have for the L7s. I'm gonna be running two of the 15'L5 series. Hey hit me back to let me know how your box turned out and I'll let you know how mines did.

live & die 4 tha luv of BASS!!!!

pervitizm

Copper - Posts: 125

Joined: April 16, 2002

Location: United States

Posted: June 25, 2002 at 9:33 PM / IP Logged

sh*t forgot to give you the site

www.kicker.com

live & die 4 tha luv of BASS!!!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Solobaric box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.