the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dmm questions


Post ReplyPost New Topic
< Prev Topic Next Topic >
bigblackhoe 
Member - Posts: 32
Member spacespace
Joined: June 10, 2004
Posted: August 22, 2004 at 10:44 PM / IP Logged  
ok so in a moment of stupidity i bought a cheap 20 dollar dmm from advance auto parts. its the kind with two probes...how do i use this thing? and also, it says that its 10 amp max....are there any dmm's that can take more than 10 amps?
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: August 22, 2004 at 11:07 PM / IP Logged  
I would ask you to read the enclosed manual as a starter.
Second, if there is a specific Q you need answered, please be specific about what you need clarified.
Third, most consumer DMM's are rated for 10 amps maximum, some are rated for 20 amps.
Forth, the DMM you purchased is just fine for what you are doing for the *shade tree mech*
If you have limited knowledge of electronics, or electricity, I would urge you to take some time to read over the basics.
Then practice some of that knowledge on small projects.
ie. Take voltage measurements from your battery, house outlet, etc.
Regards
EVIL Teken . . .
bigblackhoe 
Member - Posts: 32
Member spacespace
Joined: June 10, 2004
Posted: August 23, 2004 at 3:44 PM / IP Logged  
yeah i read the manual and all i guess the only two questions i have are this: do i just touch the negative probe to any ground? and also: so if its 10 or 20 amp max i couldnt take any measurements from my amps power wire for example?
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: August 23, 2004 at 4:59 PM / IP Logged  
bigblackhoe wrote:
do i just touch the negative probe to any ground?
Yes . . . But specificly you will touch / attach the negative probe to a paint free / clean metal surface area. Otherwise the DMM's display will either fluctuate, or display a incorrect reading.
bigblackhoe wrote:
so if its 10 or 20 amp max i couldnt take any measurements from my amps power wire for example?
No, that is correct. If you wanted to do that you could purchase a clamp on meter, which is sometimes called a *tong testor.
The last resort is to use / apply a shunt. If you have any further Q's please do ask.
Regards
EVIL Teken . . .
flynntech 
Copper - Posts: 275
Copper spacespace
Joined: April 15, 2004
Location: United States
Posted: August 30, 2004 at 6:38 AM / IP Logged  

Don't sweat it, $20 meters are fine. I have a craftsmen meter that costs about that much and it works great. I got it for free when I was in school. When I was installing, the other installers ridiculed it and said I needed a fluke. It's funny because this meter is accurate within 1% of a $400 fluke. I'm not saying flukes aren't good meters, but for mobile electronics and most anything else, anything will do as long as it's not totally cheezy cheap.

I work on electronics for a living and we use anything from the 'generic specials' to $2000 Flukes which are very accurate to .000001 volts, perfect for a cal lab...but way overkill for almost anything else.

Please learn the basics of electron movement before you start fooling around with a mutimeter, sticking it an AC outlet and so forth. As Teken mentioned, the clamp meter is better for measuring high currents, much safer and some are very accurate. 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer