96 Chrysler Sebring LXi keyless entry

Home / the12volt's Install Bay / General Discussion / 96 Chrysler Sebring LXi keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

96_Sebring

Member - Posts: 1

Joined: November 10, 2004

Location: United States

Posted: November 10, 2004 at 2:55 PM / IP Logged

Ok, please forgive me for asking such a dumb question, but i've never done anything like this but would like the feature...as many of the 1996 Chrysler Sebring LXi owners notice, when using the keyless entry, we do not have a chrip from the horn or light flash when arming/disarming the alarm. So i was advised that this forum could help me...so far i've been able to find out how to do it on aftermarket alarms and keyless entry , but not on how to do it with the factory alarm.............PLEASE someone give me a step by step procedure on how to make my horn beep/lights flash with the factory keyless entry system........this would be greatly appreciated.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 10, 2004 at 7:40 PM / IP Logged

This works in my head, but I guess you'll have to try it out. The Dodge uses a (-) trigger wire to lock and unlock the doors. You need to find the lock/unlock wire and hook this up to a relay that will trigger the parking lights/horn or both. Are you familiar with the where abouts of the door lock wire and also the parking lights & horn wires ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 11, 2004 at 9:14 AM / IP Logged

To unlock only the drivers door on models with keyless entry. Use BROWN / blue negative (-) trigger at the relays behind the radio.

To lock use RED / blue behind the glove box in a harness.

Each of these wires uses a (-) trigger and what you want to do is wire them to trigger the light flash with this diagram: (1) relay required for EACH function ( lock & unlock )

http://www.velocitymotorsport.com/images/install_notes/N2P.jpg

The parking lights are GREEN / WHITE in the driver's kick panel and requries a (+) from the output pin 30 of the relay above.

For the horn honk, you need another (2) relays like above but set up the relay like this:

http://www.velocitymotorsport.com/images/install_notes/N2N.jpg

The horn wire is GREEN/ black at the steering cloumn.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 Chrysler Sebring LXi keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.