help me, probe install

Home / the12volt's Install Bay / General Discussion / help me, probe install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

empire81

Member - Posts: 3

Joined: December 26, 2002

Posted: December 26, 2002 at 9:59 PM / IP Logged

hi. im having a real hard time putting a jvc deck into my friends 93 probe. after about 3 hours of messing around with the wrong wiring diagram(thanks installdr.com), and a crappy voltage tester, i have finally found my power. i hook the powers and the ground. face plate will lite up right away, but then shuts off after a couple of seconds. same when starting the car. is there something im missing. ive installed many decks and neve3r had a problem like this.

please help someone

BulletTooth

Copper - Posts: 122

Joined: December 13, 2002

Location: United States

Posted: December 27, 2002 at 12:13 AM / IP Logged

Sounds like bad ground, check your ground, and make a new one if needed.

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: December 27, 2002 at 2:06 AM / IP Logged

I agree check the ground.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

alarmpro

Copper - Posts: 110

Joined: September 17, 2002

Location: United States

Posted: December 28, 2002 at 12:53 AM / IP Logged

one time I had accidently jooked up a wire that I thaught was a ground but turned out to be the dimmer..

this wire will always show ground until to turn on the lights and then it will turn positive. Maybe thats your problem....

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: December 28, 2002 at 3:03 AM / IP Logged

that is a good point that I always do just to be safe is to turn on the interior dimmer light as well as turn on the head lights when probing wires.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help me, probe install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.