2002 Honda Civic Alarm Install

Got  a few questions.  I downloaded a wiring diagram from this website.  Most of the wires are in line with the diagram except the parking lights, I went to the front parking light and spliced into it there.  Is this ok?  Will splicing to one light operate the other three when I activate the alarm?  The other question I have is the power door locks.  The diagram says the wires are in the gray connector.  The problem I have is that there is another white connector on the bottom of this that has the exact same color wires.  Which one is correct?  I also connected my voltmeter to each of the wires and activated and didn't get a negative reading, I got no reading at all.  Am I doing something wrong?  Thanks for your help.Marreio

Yes this is OK but added work when you could have just grabbed it at the back of the fuse box. The Civic has a common light circuit so when you give the target wire a (+) all the lights will tun on.

POWER LOCK|WHITE/ blue          |-  |gray plug above drivers kick|

POWER UNLOCK|WHITE/ green         |-  |gray plug above drivers kick|

The above wires are the taret wires that I have for the 2002 Civic. A way to check is to unplug the molex plug from the car and toggle the switch. If the lokc do not operate, then you know you have the right plug.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA