the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hard wiring a sat radio


Post ReplyPost New Topic
< Prev Topic Next Topic >
aero 
Member - Posts: 4
Member spacespace
Joined: February 09, 2007
Location: Canada
Posted: April 08, 2007 at 11:43 PM / IP Logged  

ok so ive got the sirius streamer replay gtr normally for power your supposed to plug this into the cig lighter.. i want to do a clean install no wires showing i was wondering anyone out ther have any suggestions on how i could wire this up?

mjmauto 
Member - Posts: 43
Member spacespace
Joined: June 26, 2005
Location: Arizona, United States
Posted: April 09, 2007 at 2:18 AM / IP Logged  
Hardwire it behind the plug or the radio or go to the ignition harness.
bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: April 12, 2007 at 7:43 AM / IP Logged  
Check this post out:
https://www.the12volt.com/installbay/forum_posts.asp?tid=92783&PN=1
I think I am like the 6th response on the page, I describe how to hardwire (roughly) the plug to a car. You don't want to cut off the plug and hardwire directly from there. The replay will only operate at 5v running from the adaptor.
Ganbatte ne!
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer