JL compnents

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / JL compnents (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Blind_dude24

Member - Posts: 2

Joined: July 11, 2003

Posted: July 11, 2003 at 1:33 PM / IP Logged

Hello, I bought a a JL Audio VR component system. I want to fiberglass them into my side door panels of my 1991 cheverolet cavalier z24. I was wondering if I should make the a sealed enclosure or not. If I make it a sealed enclosure how much airspace do I need. I looked in the manual and there is no information on how much airspace is needed. Thanks for your time.

DjIQ

Copper - Posts: 107

Joined: March 10, 2003

Location: United States

Posted: July 12, 2003 at 9:23 AM / IP Logged

Component speakers do not need to be in an enclosure, enclosures are normally for subs because the airspace so dramatically affects the bass, but with midrange thats not an issu, nor is it an issue with tweeters

Blind_dude24

Member - Posts: 2

Joined: July 11, 2003

Posted: July 13, 2003 at 2:48 PM / IP Logged

wouldn't the midrange be louder if I had it in a sealed enclosure? I've read that people use a dynamat product so you don't lose the sound coming from the back of the speaker, wouldn't the enclosure be the same effect? The thing I'm wondering is how much air space would I make it have?

firepower

Member - Posts: 12

Joined: July 07, 2003

Location: Canada

Posted: July 22, 2003 at 12:28 PM / IP Logged

i don't now if it would be louder if it was sealed or not,but i'm using the jl vr's in a custom made kick panels open backed and they are kick a#$ they are loud and unbelievebly crystal clear but then again jl is one of the best in sound repoduction(my opinion) so my advice is don't waste your time and energy building a sealed enclosure they perform excellent normally installed. good luck!!!!

mecp

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

JL compnents

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.