Kick Panel Connect

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Kick Panel Connect (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wht94stang

Member - Posts: 22

Joined: October 27, 2003

Location: United States

Posted: January 08, 2004 at 9:19 AM / IP Logged

Alright guys i have a 94 stang, i have the molds for the kick panels for some 6.5's but now how do you mold it onto the plastic panel? what makes it stay. Thanks.

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: January 08, 2004 at 4:57 PM / IP Logged

you will sand the plastic panel with about 60-80 grit then fiberglass the thing on.

dream it, build it, fiberglass it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kick Panel Connect

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.