getting into fiberglass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / getting into fiberglass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

saleengt

Copper - Posts: 73

Joined: December 10, 2002

Location: United States

Posted: June 09, 2004 at 4:49 AM / IP Logged

does anybody have some good reading on doing fiberglass? like tips and tricks of the trade to build boxes and custom pannels for somebody who knows what fiberglass is but has never used it for anything but repairing bumpers n such? i figured out as much as trying to tinfoil the pannel of the trunk and fiberglassing that, but i was told to use a wood template.. how is this done? how can you make a wood template?

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: June 09, 2004 at 7:35 AM / IP Logged

try a search on specific topic in this forum first. a lot of the basic topics have been explained and there are a lot of links too

mv2123

Member - Posts: 21

Joined: June 08, 2004

Location: United States

Posted: June 09, 2004 at 7:54 AM / IP Logged

i agree search through the forums ive seen a couple of tutorials here that will help you get started

wait , you hear something sparking?

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: June 30, 2004 at 1:46 PM / IP Logged

I've got a very basic overview of fiberglassing on the site. It's an article from a previous newsletter issue.

Fiberglass Fabrication Basics

If you have any specific questions about a current project this forum is a great place to post it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

getting into fiberglass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.