the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

custom drl led wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
drewy1322 
Member - Posts: 23
Member spacespace
Joined: January 05, 2008
Location: Wisconsin, United States
Posted: January 24, 2013 at 12:51 PM / IP Logged  
I am planning on making a custom LED to put in my high beam headlight location. I have a 2001 Oldsmobile Aurora and the DRL and highbeam are wired in series. Since the highbeams/DRLs are wired in series, I was hoping someone could tell me where I need to wire in my custom LED so that it lights up with DRL Only. The LED Driver is a 350ma BuckToot. Here are my thoughts:
Left High Beam
1. PNK wire (6v+ with DRL) gets wired to VIN (Red) on BuckToot
2. VIN (Black) on BuckToot to Left Low Beam Ground (No ground on Left High Beam when DRL is active)
Right High Beam #1 - This is where I need assistance.
1. DK GRN/BLK (6v+ with DRL and 12v+ with high beam shared wired)how to wire?
2. PNK wire to VIN (Black) on BuckToot
Diagram to help.
custom drl led wiring -- posted image.
drewy1322 
Member - Posts: 23
Member spacespace
Joined: January 05, 2008
Location: Wisconsin, United States
Posted: January 24, 2013 at 12:55 PM / IP Logged  
drewy1322 
Member - Posts: 23
Member spacespace
Joined: January 05, 2008
Location: Wisconsin, United States
Posted: January 29, 2013 at 1:06 PM / IP Logged  
Diagram
This is what I'm trying to accomplish:
-PnP DRL/highbeam LED on with ignition, off when low beam is activated (relay in diagram)
-DRL Front Facia on with ignition, off when foglights activated (already have this on 528T)
-Highbeam LED still functional for flash-to-pass
-FX-R HID ballast will not ignite with flash-to-pass, only the solenoid will activate raising and lowering the shield
Can you double check my 12v reg spots (I still have to test the PnP LED voltage to get it dimmer so that's why I put 6v or 9v reg) as well as diodes?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer