cornering lights w/ pulsed to steady outp

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / cornering lights w/ pulsed to steady outp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Dayle97SE

Member - Posts: 1

Joined: January 27, 2003

Location: United States

Posted: January 27, 2003 at 10:07 PM / IP Logged

i am trying to add cornering lamps to my 1997 nissan maxima using the "pulsed to steady output" diagram i found in the special applications section under relays. everything is clear except the connections with the capacitor and resistor. first off what kind of resistor and capacitor do i use?, there seem to be so many different kinds, i was so lost when i was looking at them in radio shack. Secondly, how exactly are they connected, on the diagram it looks like they are all looped together, help! confused!

cherokee kid

Member - Posts: 13

Joined: January 16, 2003

Location: United States

Posted: January 28, 2003 at 10:19 PM / IP Logged

I just went threw thie same thing, first of all once you get the correct componets, (Print the diagram and take it to radio shack, and ask for there help) you should follow the diagram exactly, as it does work, and I soldered all my connections, but remember to use a clip on heatsink as you could ruin the capacitor, diode, and resistor if they get too much heat. If you need any more help on this issue you can email me directly as I just used that exact diagram and made a few setups and it is still fresh in my mind!

Email me at: RobertLiebnoSr@aol.com

95 Jeep Grand Cherokee Limited, 1 12" JL12W3, Kenwood Excelon KAC210 Amp, Boston Highs, Sony Head Unit, DVD, TV, Playstation

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cornering lights w/ pulsed to steady outp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.