the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

using oval trailer leds


Post ReplyPost New Topic
< Prev Topic Next Topic >
nascarfreak88 
Member - Posts: 8
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: March 15, 2007 at 9:03 PM / IP Logged  
I have a 1979 F150 and the tail lights pretty much suck. You cant put in a bigger bulb b/c it will melt the housing.
Browsing one of my truck forums i came arcross this idea-
using oval trailer leds -- posted image.
Cutting my housing up to fit them trailer LEDs like this-
using oval trailer leds -- posted image.
the only problem with using the backup lights is that they are only on/off, no tail.
i seen this diagram made by somebody who was making his own led board-
using oval trailer leds -- posted image.
so my question is can i add diodes and an extra resistor for a dim tail light? If i can what do i have to buy and where can i find them? And i want to attch this to the normal power on the trailer LED, so i dont have to open it up.
thanks
custom audio ny 
Copper - Posts: 176
Copper spacespace
Joined: March 11, 2007
Location: United States
Posted: March 17, 2007 at 3:11 PM / IP Logged  

Any car stereo shop should have diodes and resistors by the bucket full. Some may give you them for free but if not keep in mind they cost less then a penny each so don't get ripped off. Maybe offer an installer a few bucks for a handfull.

Let us know how it turns out..seems like a pretty cool idea. You will need to experiment with resistor values to find the right brigtness for the tails, the brakes of course will be full brightness.

Custom Audio
Lynbrook NY
ASE/MECP master certified
nascarfreak88 
Member - Posts: 8
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: March 17, 2007 at 10:58 PM / IP Logged  
is that how i would set it up though???
fredb38 
Member - Posts: 3
Member spacespace
Joined: May 23, 2007
Location: United States
Posted: May 24, 2007 at 10:11 PM / IP Logged  
Where did you find the diagram? I have tried the same thing but can't seem to get iy to work. Tried resistors to dim the lights but it doesn't seem to work.
Fred
nascarfreak88 
Member - Posts: 8
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: May 24, 2007 at 10:39 PM / IP Logged  
got it off of fullsizebronco.com
did a search on LED lights

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer