enough power?

Home / the12volt's Install Bay / Car Audio / enough power? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tschicky

Member - Posts: 16

Joined: June 16, 2008

Location: Canada

Posted: June 16, 2008 at 1:01 PM / IP Logged

I am currently redesigning my system but am having some difficulty.

Currently I am running 1 Focal 27V2 Polyglass sub with a Focal FP1.800 amp. I want to run 2 27v2's but am unsure as to whether or not 200w RMS is enough power for the subs. The subs are DVC 4 ohm with a power handling of 300RMS each. The amp puts out 400w RMS at 4 ohm with is what I would like to run it at as 1 ohm is not what I am looking for. I have been told yes and no and everything in between.

Not to be pretentious but I would prefer to hear from people who have some knowledge with Focal audio.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 16, 2008 at 1:04 PM / IP Logged

It will be fine.

Support the12volt.com

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: June 16, 2008 at 1:56 PM / IP Logged

Those drivers will sound fine off of a couple hundred watts a piece, I know that I personally have done systems with that sub and fed them about 225 and it sounded great, dont sweat it

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enough power?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.