2002 Accord Power Cord

Chad, You don't need to do any drilling at all. The place where you can run your power cable through the fire wall is on the upper top left coner of the car with the vechicle foward facing. The cable will come into the car on the driver side. Find a rubber boot with a lot of wire going into the car then make a small cut on the rubber boot and then fish the coat hanger through the fire wall. Round out your edges of coat hanger with a sand paper so that you won't accidentally cut any wire when you are poking it through. Once you get the coat hanger thought, tie the cable to it and pull the coat hanger through the fire wall. You might want to run the power on the driver side and run the rca on the passenger side instead. Anyway, I hope that help. Be careful whose advice you buy, but be patient with those who supply it.