Posted: January 16, 2009 at 11:55 AM / IP Logged
Posted: January 28, 2009 at 9:43 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Saturday, October 25, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, October 25, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




Now, the problem is with the harness. I have this one:
There are at least 4 wires on the aftermarket harness that do not go to anything. This IS the correct harness for the car but none of the wires match. I pulled all of the wires out of the aftermarket harness in order to rearrange them with the wiring shown here:
https://www.the12volt.com/installbay/stereodetail/411.html
However, I am lacking several colors on the stock harness. The car has never been messed with. Here is a pic of the stock harness:
The t-taps are just for the sat radio, thats all.
Aftermarket deck is a JVC- KW-AVX810
