the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

building passive crossover


Post ReplyPost New Topic
< Prev Topic Next Topic >
albertr6 
Member - Posts: 5
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: January 09, 2011 at 2:24 AM / IP Logged  
 needing some help building a lowpass 400hz crossover. i have a 07 single cab silverado, and am using an alpine pdx5, with a jl 10w3, 6.5 kappa coaxials, and bought 2 jl 6w3 4ohm subs for midbass. im wanting to use the rear channels for 6w3 subs  to have a range of 100-400hz. my plan is to set the amps xover to highpass @ 100hz, and according to the chart use a 1.59mhy coil for a 400hz  filter with a 6db slope.  im wondering if this would be a good way  to reach my 100-400hz goal for my 6" subs. thanks for any advice or critisism.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 09, 2011 at 12:29 PM / IP Logged  
Why not set your radio to 100Hz high pass and set your amp crossover to 400Hz Low Pass. 
z03mz03m 
Copper - Posts: 244
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 09, 2010
Location: Delaware, United States
Posted: January 09, 2011 at 10:27 PM / IP Logged  
Why do you want to set the high pass at 100 Hz? They are subs so why not just use the amp to low pass. Can't you switch the hp lp on the 4 channels? ...looking at pictures ...yes you can and it looked like 40- 400 Hz so just low pass them at 400.
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery
albertr6 
Member - Posts: 5
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: January 10, 2011 at 1:54 PM / IP Logged  
thanks for your advice, i forgot to list my h.u, its a jvc hd69 that only has front, and sub outs, but doesnt have an internal crossover. have you used those fmods by harrison, wondering if youve heard of any problems with those? thanks again!
albertr6 
Member - Posts: 5
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: January 10, 2011 at 2:00 PM / IP Logged  

thanks for your reply mr z03. the subs are only 6" (now i want some subway) and im using them for my midbass only between 100-400hz so idint want anything lower than that to get to them. thanks for your advice though.

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: January 10, 2011 at 2:04 PM / IP Logged  
Passive high-passing at 100Hz requires large and expensive capacitors so I also recommend using an amplifier crossover or better yet an external crossover that you can set to bandpass your desired 100-400Hz band.  I assume you have other subwoofers to handle the frequencies below 100Hz?  And how did you determine that 100-400Hz is a good band for those speakers?  How are you high-passing your mains above 400Hz?
Support the12volt.com
albertr6 
Member - Posts: 5
Member spacespace
Joined: January 11, 2006
Location: United States
Posted: January 10, 2011 at 2:24 PM / IP Logged  

thanks mr DYohn, i have a 10" sub for the 40-100hz range, and some 6.5 coaxials for the 400hz on up which are pretty bright. the 6" subs i decided to dedicate them as the 100-400hz range so that i can hear and feel the bass and toms from my music prefrence. have you tried the f-mods that go into the amp inputs? they are only about $20 and might try those. thanks again!

z03mz03m 
Copper - Posts: 244
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 09, 2010
Location: Delaware, United States
Posted: January 10, 2011 at 6:12 PM / IP Logged  
I think you need to take a look at how to achieve awesome midbass. I haven't read it for a while my self and just re-learned some very useful thingsbuilding passive crossover -- posted image. ....off to my post...
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer