New Amplifier Remote Wire

Home / the12volt's Install Bay / Car Audio / New Amplifier Remote Wire

Welcome Guest :)

Members

< Prev Topic Next Topic >

audionoob2

Member - Posts: 2

Joined: December 10, 2015

Posted: December 10, 2015 at 5:55 PM / IP Logged

Hi, complete noob when it comes to car audio...

I received an amp, subs, and a wiring kit from a friend.

I installed it all just fine with no remote wire. The amplifier turns on and stays on.

No remote wire = amp always on

Of course, my battery died one morning before work...

I am trying to connect a remote wire from the REM connector on the amplifier to a fuse (I'm using the radio fuse)

My problem is that when I do this:

Car is on = AMP OFF

Car is off = AMP ON

Car is on, remote wire disconnected AMP = ON

What's going on here? Any help would be appreciated. It seems to be backward! Also, why is my amp on with no remote wire?

audionoob2

Member - Posts: 2

Joined: December 10, 2015

Posted: December 10, 2015 at 5:57 PM / IP Logged

I apologize for the double post; however, this is my amp.

http://www.amazon.com/Cadence-Flash-FXA1500-1-Amplifier-Remote/dp/B009UV4P0G

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: December 16, 2015 at 12:31 PM / IP Logged

What are your connections to the amp.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.