cap needed?

Home / the12volt's Install Bay / Car Audio / cap needed? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: September 22, 2003 at 3:48 PM / IP Logged

Im installing an eclipse aluminum 15 with the alpine m500 amp, would you guys suggest putting a 1 farad cap if i can or would it not make much of a diff?

dream it, build it, fiberglass it

nedgeworth

Silver - Posts: 264

Joined: November 03, 2002

Location: Australia

Posted: September 22, 2003 at 3:52 PM / IP Logged

What is your purpose for putting the cap in???

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: September 22, 2003 at 4:13 PM / IP Logged

if it needs the extra boost?

dream it, build it, fiberglass it

nedgeworth

Silver - Posts: 264

Joined: November 03, 2002

Location: Australia

Posted: September 22, 2003 at 4:19 PM / IP Logged

Well if your going for SQ then this is a pretty good choice as they are great for voltage regulation. Just remember adding a cap puts extra strain on your vehicles electrical system, but sounds as though it shouldn't be too much of a problem for you.

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: September 22, 2003 at 4:28 PM / IP Logged

I guess i wont need one then. Im putting in components eventually and the reason im only running a m500 is because i dont want to strain my elec. system. Thanks

dream it, build it, fiberglass it

nedgeworth

Silver - Posts: 264

Joined: November 03, 2002

Location: Australia

Posted: September 22, 2003 at 4:35 PM / IP Logged

No probs.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cap needed?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.