Woofer enclosure Help

Home / the12volt's Install Bay / Car Audio / Woofer enclosure Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Quick

Member - Posts: 17

Joined: July 15, 2002

Location: United States

Posted: July 19, 2002 at 8:38 PM / IP Logged

ok I have 2 12" subs in a box..it is one box with divider ,so two enclosures..the dimensions are 4" to 8" bottom 16" tall and approx 36" long..the amp is mb acoustics 600w 2/1..in a 1992 isuzu single cab truck..now the questions:

1. is the box big enough?

2. sould the seperate enclosures be drilled( maybe a 3inch hole) between to connect?

3. should the amp be run to each speaker or parallel the spkrs and bridge the amp?

thats all for now..thx

GlassWolf

Copper - Posts: 365

Joined: June 22, 2002

Location: South Carolina, United States

Posted: July 19, 2002 at 9:49 PM / IP Logged

dimensions look fine, no need to alter the box, and if they are 4 ohm subs, in parallel would make 2 ohms, bridged would make 1 ohm, so no run them in 2 channel stereo

-GlassWolf

Pioneer Stage-4, Orion, DynAudio, Fi

Quick

Member - Posts: 17

Joined: July 15, 2002

Location: United States

Posted: July 20, 2002 at 7:49 AM / IP Logged

ok what about this...i have 2 clarion 3520 amps they are 90 bridged with bass boost and low pass filters...would they do a better job, even though they are lower power?

clarion 3520 2/1 channel x/channelflex crossover plus subsonic filter..

i realize this is a pieced together system..i'm just trying to get the best sound possible here...thx again peeps

GlassWolf

Copper - Posts: 365

Joined: June 22, 2002

Location: South Carolina, United States

Posted: July 20, 2002 at 6:02 PM / IP Logged

try it and see.

if the speakers are 4 ohms each you're in good shape. bridge the amps and run one for each sub.

see how it sounds. adjust gains accordingly.

-GlassWolf

Pioneer Stage-4, Orion, DynAudio, Fi

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Woofer enclosure Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.