box building

Home / the12volt's Install Bay / Car Audio / box building (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

RJay

Member - Posts: 2

Joined: August 07, 2002

Location: United States

Posted: August 07, 2002 at 12:13 PM / IP Logged

i have three 10 inch earthquake tremor subs and i wanna build a vented box for it ....there's a paper that came with it with the demensions to build one ported box, but how do i build one for three of 'em? and i don't really understand how to use the theile-small parameters, can someone explain that to me .....and when building a box for three subs, do they all share the same air space or put a divider between them? will it make a difference?

thanks

rjay

GlassWolf

Copper - Posts: 365

Joined: June 22, 2002

Location: South Carolina, United States

Posted: August 07, 2002 at 3:07 PM / IP Logged

try here:

https://www.the12volt.com/caraudio/boxes.asp

shared or divided won't make a big difference.

-GlassWolf

Pioneer Stage-4, Orion, DynAudio, Fi

RJay

Member - Posts: 2

Joined: August 07, 2002

Location: United States

Posted: August 07, 2002 at 4:01 PM / IP Logged

i still don't understand the rules of theile/small parameters, so do you think i should just build a box with three vents and devide the subs? cuz they're all gonna be wired in parallel. here's the specs.. Fs=28Hz Qms=4.726 Qes=0.483 Qts=0.438 VAS=1.6Ft 44 liters Xmax=0.5" 85dB 1W/1M Revc=6.3 Levc=6.3mH @ (1kHz) single voice coil/8ohm how would i be able to use that towards building a vented/ported box for three subs?

thanks

rjay

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box building

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.