imaging components

Home / the12volt's Install Bay / Car Audio / imaging components (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: April 11, 2004 at 7:10 PM / IP Logged

If i were to build kick pods with a midrange and tweeter how do i get the right angles and direction and all? What are some rules of thumb and whatnot.

dream it, build it, fiberglass it

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 11, 2004 at 11:06 PM / IP Logged

When I did mine, it was all about trial and error. I did a couple of set before I got them imaged properly. I dont know if there is a better way to do it or not but I have always been a big fan of trial and error because theory's are all well and good but when its right in front of me its easier to work with

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 12, 2004 at 8:19 AM / IP Logged

Yes, I agree, as every car is different and every speaker performs differenly. Start with tweets aimed towards the dome light...

Support the12volt.com

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: April 12, 2004 at 9:21 PM / IP Logged

I would do trial and error but i am going to be making the kick pods out of fiberglass.But ill aim the tweeter at the dome light, what about the woofer.

dream it, build it, fiberglass it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

imaging components

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.