what amp should i use?

Home / the12volt's Install Bay / Car Audio / what amp should i use? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jbird724

Member - Posts: 1

Joined: May 23, 2004

Posted: May 23, 2004 at 1:54 PM / IP Logged

im tryin to push 4 rockford fosgate 12'' HX2 punch series subs. dual coil 4 ohms. 1000 watts max. im not really fixed on running them at max. i just need the cheapest way to run them, but also make it worth having them. please wat amp should i use???

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: May 24, 2004 at 7:00 AM / IP Logged

Wire them for a 2 ohm load to be connected onto a class D mono amp, like this:

what amp should i use? -- posted image.

Shop for a good buy on a class D amp, along the lines of this Hifonics Brutus BX1000D, that will deliver 500 to 600 watts at 2 ohms.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what amp should i use?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.