the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How to wire two bazooka tubes?


Post ReplyPost New Topic
< Prev Topic Next Topic >
psyon 
Copper - Posts: 54
Copper spacespace
Joined: June 01, 2004
Location: United States
Posted: June 17, 2004 at 11:04 PM / IP Logged  

Hello,

    I have one powered RS8A (150 Watts RMS) tube and one non-powered EL8 (150 watts RMS handling) tube....  i was told you can hook up a non-powered to a powered sub and double the output (150x2).... i was wondering how exactly do you wire that?  (i.e. how do i hook up the speaker cabling?)

i have all mounting brackets, etc.... just the wiring part holding me up.

thanks!

Loving Car Audio since 1992
nollaz 
Member - Posts: 44
Member spacespace
Joined: June 23, 2004
Location: United States
Posted: June 23, 2004 at 2:17 AM / IP Logged  
ive never heard of this being done, but the powered tube has an internal amp(imbeded in tube) and unless you want to tamper with delicat seals and groments then you can open it up and tap into the wire that runs to the sub. but by doing this your going to cut the power to each sub in half to youll end up with 2x75 and the possibilty of ruing your powered bazooka. the best way to go is buy a amp to power the other sub.
yup
nollaz 
Member - Posts: 44
Member spacespace
Joined: June 23, 2004
Location: United States
Posted: June 23, 2004 at 2:18 AM / IP Logged  
but hey no ones tried it so if your not afraid go for it
yup
fuseblower 
Silver - Posts: 403
Silver spacespace
Joined: June 25, 2003
Location: United States
Posted: June 23, 2004 at 8:05 AM / IP Logged  
You may want to call bazooka.  I have heard what you are trying to do can be done.  You might want to call bazooka and ask them how to connect the subs.  They might have an adapter that you can use.
psyon 
Copper - Posts: 54
Copper spacespace
Joined: June 01, 2004
Location: United States
Posted: June 23, 2004 at 10:00 AM / IP Logged  

< language=> directly from SAS:

RSA Optional High-Level Output

The Amplified Bazooka has provisions for high level output to a second Bass Tube. If you want to use this feature, you can purchase a Bazooka slave unit from an authorized SAS dealer.

Be sure to use a slave unit that is the same size as you amplified unit. This is necessary because different size woofers have different efficiencies. These efficiency differences result in the two woofers playing at different volume levels, making it difficult to adjust the system to the desired sonic quality.

Located the BROWN and YELLOW wires on the 14-pin Molex plug, connect the BROWN wire to the RED terminal of the slave unit, and the YELLOW wire to the BLACK terminal of the slave unit.

The Amplified Bazooka RS8A is now operating under a 2 ohm load and is delivering a total of 300 watts

Loving Car Audio since 1992
psyon 
Copper - Posts: 54
Copper spacespace
Joined: June 01, 2004
Location: United States
Posted: June 23, 2004 at 10:00 AM / IP Logged  

< language=>BAM!  done, and..... done.

sounds great!  works fine.  Warranties intact.  SAS approves.  300 watts baby!

Loving Car Audio since 1992

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer