the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

enclosure filler Qs


Post ReplyPost New Topic
< Prev Topic Next Topic >
nickch 
Copper - Posts: 50
Copper spacespace
Joined: June 01, 2004
Location: New Zealand
Posted: June 22, 2004 at 3:50 AM / IP Logged  

hi, just have a few things on my mind about subs and enclosures

1) Do we really have to follow the recommended enclosure size (sealed) given by the manufacturer? or does it really depend on what type of bass you'd like to hear. If I follow the recommended size, how would the bass sound like and how would it differ from enclosure size closer to preference?

2) If we have the right enclosure size, then i dont really need to fill it with acoustic filler rite?

Any tips would be great as i would like to have a fiberglass side on my enclosure and i wouldn't want any filler in there so its tidier.

Also if there are any tips on how to hide wiring. would be great.. thanks.

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: June 22, 2004 at 8:38 AM / IP Logged  

1.  ALWAYS begin with the manufacturer's recomendations.  If you really know what you are doing, there are many ways to use the T/S numbers (or determine what they really are for a given woofer) and build accordingly.  But as a beginner, don't try it.

2.  I always recomend polyfill for a sealed enclosure.  NEVER use fiberglass insulation, I don't care how many cheesy books or people with stories tell you it's OK.  It can and will degrade your woofer's performance and in a worst case can destroy it.

3.  Hiding wiring is all up to your skills, ingenuity and willinginess to rip the car apart.

Support the12volt.com
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: June 22, 2004 at 9:16 AM / IP Logged  
Just curious DYohn, what's the rationale behind always recommending polyfill for a sealed box?
New Project: 2003 Pathfinder
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: June 22, 2004 at 9:53 AM / IP Logged  
Dampening of standing waves, mainly. Plus to my ears it creates a smoother, more musical quality to the sound with most loudspeakers.  I usually fill the enclosure, test the system, then pull some out if it's too flabby or add more if it's too tight.
Support the12volt.com
sandt38 
Copper - Posts: 60
Copper spacespace
Joined: May 25, 2004
Location: United States
Posted: June 22, 2004 at 10:57 AM / IP Logged  

kfr01 wrote:
Just curious DYohn, what's the rationale behind always recommending polyfill for a sealed box?

The filler slows down the soundwaves in the box. What this does is gives the enclosure a "larger" feel to it. This can aid in transient responce, and extention, similar to building a larger enclosure. However, in ported applications, without the proper measuring equipment there is no way to accurately measure the change that results in port tuning. And in all cases of ported apps this will have an affect on it. Please do not attempt this in a ported application.

While I have found it works on some drivers, I can honestly say I have heard no differance whatsoever on other drivers. I actually did a H2H test about 4 years ago with 6 or 7 differant drivers. 4 made a differance and the others did not.

sandt38 
Copper - Posts: 60
Copper spacespace
Joined: May 25, 2004
Location: United States
Posted: June 22, 2004 at 11:05 AM / IP Logged  

nickch wrote:

1) Do we really have to follow the recommended enclosure size (sealed) given by the manufacturer? or does it really depend on what type of bass you'd like to hear. If I follow the recommended size, how would the bass sound like and how would it differ from enclosure size closer to preference?

2) If we have the right enclosure size, then i dont really need to fill it with acoustic filler rite?

1) I can't tell you the last time I did. However as reccomended without proper understanding of how a driver functions, and the affect altering the enclosure has on how it functions, I don't suggest you do this.

The general public's perception of "good sound" is typically a high sub frequency peak. Most people don't hear this when they listen to a subwoofer. However, with that peak comes an unnatural shift in frequency reproduction.  In order to boost these frequencies Mfgs reccomend a smaller sealed enclosure. This is also beneficial to the Mfg as far as warranty issue reduction due to the reduction of driver excursion with the same power.

2) You have to be the judge. Your ears will tell you what is pleasing to you far better than anyone elses opinion ever can.

sandt38 
Copper - Posts: 60
Copper spacespace
Joined: May 25, 2004
Location: United States
Posted: June 22, 2004 at 11:08 AM / IP Logged  

^^edit^^

[b][u]1) I can't tell you the last time I did. However as reccomended without proper understanding of how a driver functions, and the affect altering the enclosure has on how it functions, I don't suggest you do this.[/u][/b]

I meant to say, I don't suggest you do this without the proper knowledge or help from someone knowledgeable who can assist you.

Look at www.linearteam.org for WinISD Pro for a great freeware design program.

nickch 
Copper - Posts: 50
Copper spacespace
Joined: June 01, 2004
Location: New Zealand
Posted: June 22, 2004 at 7:03 PM / IP Logged  

thanks.

but i was just asking if its really neccessary to fill the box up if i build a perfect enclosure with the recommended volume as i'm thinking of having a thick lexan window with mirrors on the walls and i dont want to have to put in filler that will kinda mess the display up even tho it actually will improve the sound.

nickch 
Copper - Posts: 50
Copper spacespace
Joined: June 01, 2004
Location: New Zealand
Posted: June 23, 2004 at 7:25 AM / IP Logged  
bump
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: June 23, 2004 at 8:27 AM / IP Logged  
Go for it.  You won't know how it sounds until you try.
Support the12volt.com
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer