Alpine Bandpass box - SBS-1041BP

Hello, new to site and must say I love it.

After building the 418 stroker motor for my '90 F150 Super Cab, well it's a bit loud (with the dual 3" exhaust).  Every time someone rides with me they want me to turn up the stereo because you can't  hear any bass.

What I have now;

Kenwood HU (love it by the way) / Sony XM1002HX  amp / 2 older 10"  Kicker subs in a ported truck type box. After finding this site I learned that Sony.....well.....sucks!  A week later the amp started blowing fuses (SUPRISE!).

Now the plan.......Completely replace the amp and box......the problem is I have zero time to build a proper box thus I am looking for a quality (gasp) prefabbed box, either loaded or not. I found that Alpine has a single 10" Bandpass box (model# SBS-1041BP ). 

Has anyone used one of these?  If so, I will get it and a Fosgate P3001amp to power it.

If not, can you recommend a prefabbed box and subs with a $300 (on the high side) budget?  

I'm not looking to shake the earth, the truck does that, I just want to be able to hear and feel the bass over the truck. Being able to hear it a few feet away from it would be nice too. :-)

Thanks for the responces guys.

I did some searching and found that all the boxes come with the lower end subs, if you can call any RF or Alpine subs low end  lol.  Generally, I didn't like the specs on them. So now I'm just going to get 2  Kicker CVR10-4 powered by the RF P3001 and throw in my current box for now.  As time allows I will build or have a proper box built.