Help choosing subs

Home / the12volt's Install Bay / Car Audio / Help choosing subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

deva

Member - Posts: 4

Joined: October 20, 2004

Posted: October 20, 2004 at 1:42 PM / IP Logged

recently i bought xtant a3001 amp and now I need some subs.

I'm going for vented box and thinking of 12in alpine type-r, 2 memphis pr104 or 2 rf p4410. can any1 tell me which of these will bump harder.

any advice apriciated

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: October 20, 2004 at 1:47 PM / IP Logged

I've heard the alpines and they are ok. I've heard (by word of mouth not actual hearing) that Memphis subs can bump. Probably depends upon how you decide to run the subs (ported or sealed). Memphis is a good company.

deva

Member - Posts: 4

Joined: October 20, 2004

Posted: October 20, 2004 at 2:41 PM / IP Logged

i'm going for ported, can 2 memphis 10in be louder than 1 12in type-r?

fatgotti

Copper - Posts: 177

Joined: October 11, 2004

Location: Oklahoma, United States

Posted: October 20, 2004 at 2:46 PM / IP Logged

I perfer Memphis and I like Alpine but when it comes to subs I would definetly go with the Memphis 10's

Fatgotti Yeah my name is John and I am FAT!! YEAH BABY

fatgotti

Copper - Posts: 177

Joined: October 11, 2004

Location: Oklahoma, United States

Posted: October 20, 2004 at 2:50 PM / IP Logged

ported will give you a little boomier (if that's really a word) bass than sealed, but sealed takes less finesse and is a tighter hit in my opinion..

Fatgotti Yeah my name is John and I am FAT!! YEAH BABY

deva

Member - Posts: 4

Joined: October 20, 2004

Posted: October 20, 2004 at 3:18 PM / IP Logged

I'm going for ported becouse my amp is 300 rms @2ohm and memphis are 200rms each, so i' d be underpowering them

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help choosing subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.