Crossovers

is there anyway i can install crossovers in my 98 grand cherokee (w/ infinity system) and keep my factory amp? if so how would i do that?

-justin

The Infinity speakers have the crossover's built into the speakers themselves. If you add a crossover to the system it will eventually get crossed over again at the speaker terminals.... basically will sound no different ( probably worse ). You would have to replace the speakers with other speakers in order to use a add on crossover to the system.

the speakers are not for the factory speakers, they came with the infinity 605cs' that i bought. i installed the speakers but not the crossovers.  is there anyway i can add on the crossovers with the facory amp?  if so how would i do that?

-justin

there are two different wires that come out of the amp.  one for the tweeters and one for the midbass.  should i put the tweeter and midbase both in the input and then the seperate the outputs to the tweeters and midbass?

-justin

If the crossover modules have two sets of inputs and then you can separate the tweeter input and the woofer input. If the modules only have a single input... use the woofer speakers and the crossover will do the rest for the output to the tweeters.