choosing subs for rockford 800a2

Home / the12volt's Install Bay / Car Audio / choosing subs for rockford 800a2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chexmixelite

Member - Posts: 19

Joined: April 01, 2004

Location: United States

Posted: May 08, 2005 at 2:56 AM / IP Logged

I have a rockford fosgate 800a2... And was using 4x 10" mtx roadthunder and connected seris parralel... Sounded great in my astro van... But my van broke down.... And I got a new car... A scion xb... I installed the amp and speakers... 2 underneath driver and passenger seat and 2 in the back....

Question is... I just want to upgrade my subs... I want 2 10" under the seats... And 2 12" in the back... Any recommeneded subs

Another question... How would I connect the 2 10" sub and 2 12" sub with my amp... Would it be seris parallel on 1 10" and 1 12" together on each channel... Or seris parallel on 2 10" and and seris parallel on 2 12" seperate channel... Thanks in advance....

Sorry if its long and kind of confusing....

boardinbum

Silver - Posts: 358

Joined: February 07, 2005

Location: United States

Posted: May 08, 2005 at 5:56 AM / IP Logged

You want two 10's and two 12's? Why?

audiobass10

Silver - Posts: 328

Joined: October 11, 2004

Location: United States

Posted: May 08, 2005 at 8:52 AM / IP Logged

Stick with the same size subs and keep them all in the back.

Dave

Pioneer Premier DEH-P660

15" Kicker CVR

Profile AP1000M

It's Loud

forbidden

Platinum - Posts: 5,353

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: May 08, 2005 at 5:02 PM / IP Logged

^^^^^ Exactly, find yourself how much room you have available for a box, once this is done, then you can narrow down the sub search to 2 12" 4 ohm dvc subs wired in series / parallel to 4 ohm mono for max output of your amp. Two 12" in the proper custom box will slaughter 4 subs in the incorrect box.

Top Secret, I can tell you but then my wife will kill me.

chexmixelite

Member - Posts: 19

Joined: April 01, 2004

Location: United States

Posted: May 08, 2005 at 7:55 PM / IP Logged

Well I wanted 2 10" and 2 12" cause I already got the 2 10" box under the seats... Which is .65 cu ft airspace 6 inch dept...if I go for 4 10s.... Which subs would you receomeend.... Or if I jus go for 2 10s.... Which sub.... Or if I go for 2 12" subs in the back of my xb.... What should I get... The space is not a problem.... Thanks

chexmixelite

Member - Posts: 19

Joined: April 01, 2004

Location: United States

Posted: May 11, 2005 at 5:25 PM / IP Logged

Would 2 10" rockford fosgate he2 match my amp?? The guy sellin it for 200 with the rockford box... Is that a good deal? Or should I look around. Thanks

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: May 11, 2005 at 7:20 PM / IP Logged

The 2 10" HE2's will put out some good thump. Better watch out though, that 800.2 will put a good beating on your electrical system when you atart banging on it. Why not consider a good Class D mono Block?

Chris

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

choosing subs for rockford 800a2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.