the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Box and Amp Layout Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
mfronczak 
Member - Posts: 7
Member spacespace
Joined: March 25, 2003
Posted: July 27, 2005 at 8:29 AM / IP Logged  

I have a couple of quick questions regarding the layout of subs and an amp in my trunk.  My trunk is only 40” wide where I want to mount everything – my 32” long box and 12” wide amp.  My current plan is to attach a piece of wood to my trunk floor and mount the amp in the very middle.  Then, I am going to add a second shelf above the first and put the speaker box (with 2 10” subs) on that top shelf.  This will accomplish everything I want – make the amp secure, leave future space for more amps and make the box itself easily removable.  I was even thinking of dressing up the lower shelf with some neon lights.  My questions are:

 

1)     If I build this shelf system, what is a safe distance to leave between the top of the amp and a second shelf?  Will this shelf restrict too much air flow, and if so, can I just mount a cooling fan to help out?

2)     With the subs sitting up on a 2nd shelf, am I going to introduce a rattle of any kind?  Obviously, I will make sure that the 2nd shelf is nice and sturdy, both it and the box will be carpeted and I was even thinking of attaching the box to the shelf with some brackets or something.  However, I’m worried that when the bass hits, it might vibrate too much.

mfronczak 
Member - Posts: 7
Member spacespace
Joined: March 25, 2003
Posted: July 27, 2005 at 8:30 AM / IP Logged  

I have a couple of quick questions regarding the layout of subs and an amp in my trunk.  My trunk is only 40” wide where I want to mount everything – my 32” long box and 12” wide amp.  My current plan is to attach a piece of wood to my trunk floor and mount the amp in the very middle.  Then, I am going to add a second shelf above the first and put the speaker box (with 2 10” subs) on that top shelf.  This will accomplish everything I want – make the amp secure, leave future space for more amps and make the box itself easily removable.  I was even thinking of dressing up the lower shelf with some neon lights.  My questions are:

1) If I build this shelf system, what is a safe distance to leave between the top of the amp and a second shelf?  Will this shelf restrict too much air flow, and if so, can I just mount a cooling fan to help out?

2) With the subs sitting up on a 2nd shelf, am I going to introduce a rattle of any kind?  Obviously, I will make sure that the 2nd shelf is nice and sturdy, both it and the box will be carpeted and I was even thinking of attaching the box to the shelf with some brackets or something.  However, I’m worried that when the bass hits, it might vibrate too much.

sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: July 27, 2005 at 8:43 AM / IP Logged  
mfronczak wrote:
With the subs sitting up on a 2nd shelf, am I going to introduce a rattle of any kind? Obviously, I will make sure that the 2nd shelf is nice and sturdy, both it and the box will be carpeted and I was even thinking of attaching the box to the shelf with some brackets or something. However, I’m worried that when the bass hits, it might vibrate too much.
I really like that idea... it sounds like it would look neato.
Okay, a few thoughts on that..
1)I don't know any hard or fast rules here, just personnal experience.. that is bolting your box directly to the car greatly contributes to that car stereo feeling of "bassing"... something I really relish. Personnally, I'd be hesitant to built subs up like that.
2)I do however REALLY like the mental image I'm getting of your install plan... however as you say, building up a shelf like that would take judicious use of MDF ... perhaps it might be easier to built a second shelf up for your amps instead of the subs?
3)When building your shelves, use 3/4" MDF for the entire project, shelves, box and all. Bolt the the bottom shelf to the car. When you cut your MDF, measure twice and cut once... make sure all the pieces fit together *well* and use Liquid Nail in between all the joints.
Certainly *attach* your box to the shelf.. big brakets and deck screws..!
Aside from my own minor reservations about removing the box from contact with the frame of the car, the install plan should work quite well.
Good luck.
"I'm finished!" - Daniel Plainview
Master Asylum 
Silver - Posts: 400
Silver spacespace
Joined: November 05, 2004
Location: United States
Posted: July 27, 2005 at 1:07 PM / IP Logged  

I'd say he would be fine with having it lifted off the floor of the trunk as long as it is sufficienty held down and such. It might affect the sound a bit but I don't have enough experience to say anything about that.

Concerning the air space, you shouldn't need too much, you have to consider, how much air flow goes through your trunk space currently? The ceiling height over it isn't going to need much really since there is no huge current of air flow moving through it. The only time that it'd matter is if you put fans pushing a lot of air for an amp that likes to get hot. I'd say you should be fine with a 2" clearance and if it is getting warm, fan it. :)

1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer