Alpine TDM-7534 HU problem

Home / the12volt's Install Bay / Car Audio / Alpine TDM-7534 HU problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

syNNer

Member - Posts: 7

Joined: February 27, 2003

Location: Canada

Posted: September 10, 2005 at 12:39 PM / IP Logged

We have an older Alpine TDM-7534 cassette head unit we've been using in one of our work trucks. We sold the last truck it was in several months ago. Yesterday I went to put the deck into a new to us work truck and the deck won't power up. All that happens is a little square red LED in the upper left hand corner flashes, nothing changes on the display, a tape won't play, nothing. Is there a security code/reset on this deck that I don't know about? TIA

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: September 10, 2005 at 1:34 PM / IP Logged

Alpine never used codes but resetting the unit would be where I'd look first. This is vintage 1996 so I'm not certain of the location of the reset button but I believe it's behind the faceplate. Should be small and red.

syNNer

Member - Posts: 7

Joined: February 27, 2003

Location: Canada

Posted: September 11, 2005 at 1:07 AM / IP Logged

I can't seem to locate any red reset button on the unit, behind the faceplate or elsewhere. Pushing the power button only turns the flashing red LED on and off at this point.

syNNer

Member - Posts: 7

Joined: February 27, 2003

Location: Canada

Posted: September 14, 2005 at 1:22 PM / IP Logged

turns out the replacement OEM harness I ordered had a loose ground wire clip. all is well. thanks for the help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine TDM-7534 HU problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.