Ported Enclosure For 2 Pioneer 12

Home / the12volt's Install Bay / Car Audio / Ported Enclosure For 2 Pioneer 12 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

carlos06

Member - Posts: 4

Joined: October 19, 2005

Location: Dominican Republic

Posted: October 19, 2005 at 8:59 PM / IP Logged

I need help in the construction of a ported enclosure for 2 pioneer of 12¨. Please help me with that.

Carlos S.

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: October 19, 2005 at 10:01 PM / IP Logged

Look over the rules. Now give us more words. There are nice people here on this forum who would be willing to help you out, but we need muchos more effort on your part to describe the model numbers of the subs and amplifiers and other pertinent info like what car it's going into, how much power applied....

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

carlos06

Member - Posts: 4

Joined: October 19, 2005

Location: Dominican Republic

Posted: October 19, 2005 at 10:31 PM / IP Logged

Ok Sorry. I have two 12¨ Pioneer TS-W306Dual Voice Coil of 400w RMS with a Hifonics BX1205D Mono Amp Brigdes to 1ohm. I have it in a Skoda Fabia. People say the best sound is in a Ported Enclosure. Any other thing please ask me. I think thats all.

Carlos S.

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: October 19, 2005 at 11:11 PM / IP Logged

You'd be better off with the SVC 4 ohm subs with that amplifier, which would make 900 watts into 2 ohms. But you have the DVC 4's, and you're putting a 1 ohm load on the amp for 1200 watts. I don't like this setup especially if you are looking for a vented enclosure. Overpowering will kill the subs especially if they're in a box that will encourage it. And the 1 ohm load will put extraordinary demands on that amp.

Pioneer wants a registration and log-in to give up the manual online, and I'm not going thru that. Do you have one, and what does it say about ported enclosures for this sub? And can you provide full parameters listing for the sub?

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

carlos06

Member - Posts: 4

Joined: October 19, 2005

Location: Dominican Republic

Posted: October 20, 2005 at 9:25 AM / IP Logged

I bought the 2 Pioneer already, i have to buy the amp. If you dont like that amp, what amp do you recommend. They say to me that the amp dont throw really 1200, that it really throw like 800 watts. what amp do you recommend

Carlos S.

carlos06

Member - Posts: 4

Joined: October 19, 2005

Location: Dominican Republic

Posted: October 20, 2005 at 9:29 AM / IP Logged

something not very expensive,less than 250, thats my budget, 250

Carlos S.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ported Enclosure For 2 Pioneer 12

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.